2CY gear pump material

2CY gear pump gear can be roughly divided into 45 steel,40 chromium, stainless steel, copper, etc.
Different types of gear pumps have different materials and USES. Examples below are as follows :2CY and KCB gear oil pumps: this pump is suitable for transporting all kinds of lubricated liquids.

This series of gear pump mainly consists of gear, shaft, pump body, pump cover, bearing sleeve, shaft end seal, etc.
The gear is manufactured by double arc sine curve tooth form.
Compared with the involute gear, the most prominent advantage is that there is no relative sliding of the tooth profile surface during the tooth clenching process, so the tooth surface has no wear, smooth operation, no liquid phenomenon, low noise, long life and high efficiency.
The pump is free from the traditional preset constraints, so the development of gear pump in the preset, production and use of the long into a new category.
This series of pumps are simple and compact, easy to use and maintain,Kemai brand 2CY or KCB model stainless steel gear pumps can transport edible oil, beverage and so on.
Flow range :1.1-150m3/h; lift range :13-250m; working pressure: less than or equal to 3.0mpa
2cy gear pump for transporting temperature is not higher than 120 ℃), viscosity of 5 x 10-5-1.5 x 10-3 m2 / s not containing solid particles and fibers, non-corrosive lubricating oil, edible oil and heavy oil, industrial light oil oil with copper gear can deliver low flash point liquid, such as gasoline, benzene, etc.
Applicable to oil depot, docks, ships, factories, farms, mines, and so on.